Toyota Highlander Owners Manual: Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
Turn signal
indicator
Headlight
indicator
Tail light
indicator
Headlight high
beam
indicator
*2
Automatic high
beam
indicator
*2
Front fog light
indicator
*2
Cruise control
indicator
*2
Cruise control
“set”
indicator
*2
Lda (lane
departure
alert) indicator
*2,3
Intuitive
parking assist
indicator
*1,4
Slip indicator
*1
Vsc off
indicator
*1,2,5
Pre-collision
system
warning light
*1,2
All-wheel
drive lock indicator
*2
Downhill assist
control
system indicator
*2,6,7
Bsm (blind
spot monitor)
outside rear view
mirror indicators
*8
Security
indicator
*1,9
Eco driving
indicator
light
Snow mode
indicator
*1,8
“Air bag on/
off” indicator
*1: Vehicles without a smart key system: these lights turn on when the engine switch is turned to the "on"¸ position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your toyota dealer.
Vehicles with a smart key system: these lights turn on when the engine switch is turned to ignition on mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your toyota dealer.
*2: If equipped
*3: Refer to "navigation and multimedia system owner"¦s manual"¸.
*4: The light flashes to indicate that the system is operating.
*5: The light comes on when the system is turned off. The light flashes faster than usual to indicate that the system is operating.
*6: In order to confirm operation, the bsm outside rear view mirror indicators illuminate in the following situations:
- vehicles without a smart key system
- when the engine switch is turned to the "on"¸ position while the bsm main switch is set to on.
- when the bsm main switch is set to on while the engine switch is in the "on"¸ position
- vehicles with a smart key system
- when the engine switch is turned to ignition on mode while the bsm main switch is set to on.
- when the bsm main switch is set to on while the engine switch is in ignition on mode.
If the system is functioning correctly, the bsm outside rear view mirror indicators will turn off after a few seconds.
If the bsm outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your toyota dealer.
*7: This light illuminates on the outside rear view mirrors.
*8: This light illuminates on the center panel.
*9: The light does not turn on when the system is disabled.
 Warning
Should a safety system light such as the abs and srs warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your toyota dealer immediately if this occurs. |
Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle’s
systems.
*1Brake system
warning
light
*1Brake system
warning
light
*1,2Charging
system warning
light
*1,2Low ...
Gauge and meters
The displayed content may differ depending on the type of
meter.
Vehicles with monochrome display
Vehicles with color display
Tachometer
displays the engine speed in revolut ...
More about Toyota Highlander:
Rear view monitor system precautions
Area displayed on screen
The rear view monitor system
displays an image of the view
from the bumper of the rear
area of the vehicle.
To adjust the image on the rear
view monitor system screen.
The area displayed on the
screen may vary according to
vehicle orientation conditions.
...
