Toyota Highlander manuals

Toyota Highlander Owners Manual: Utility vehicle feature

Warning


Utility vehicle precautions

Always observe the following precautions to minimize the risk of death, serious injury or damage to your vehicle:

  • in a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Therefore, the driver and all passengers should fasten their seat belts whenever the vehicle is moving.
  • Avoid sharp turns or abrupt maneuvers, if at all possible.

    Failure to operate this vehicle correctly may result in loss of control or vehicle rollover causing death or serious injury.

  • Loading cargo on the roof luggage carrier (if equipped) will make the center of the vehicle gravity higher. Avoid high speeds, sudden starts, sharp turns, sudden braking or abrupt maneuvers, otherwise it may result in loss of control or vehicle rollover due to failure to operate this vehicle correctly.
  • Always slow down in gusty crosswinds. Because of its profile and higher center of gravity, your vehicle is more sensitive to side winds than an ordinary passenger car. Slowing down will allow you to have better control.
  • Do not drive horizontally across steep slopes. Driving straight up or straight down is preferred. Your vehicle (or any similar off-road vehicle) can tip over sideways much more easily than forward or backward.
Utility vehicle precautions
This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity. ...

Off-road driving
Your vehicle is not designed to be driven off-road. However, in the event that off-road driving cannot be avoided, please observe the following precautions to help avoid the areas prohibited to vehi ...

More about Toyota Highlander:

Rear axle hub & bearing ASSY LH (FF)
REPLACEMENT HINT: COMPONENTS: SEE PAGE 30-4 Replace the RH side by the same procedures with LH side. 1. REMOVE REAR WHEEL 2. SEPARATE RR DISC BRAKE CALIPER ASSY RH (a) Remove the bolt and separate the flexible hose. (b) Remove the 2 bolts and brake caliper. (c) Support the brake cali ...

В© 2011-2024 Copyright www.tohighlander.com