Toyota Highlander Service Manual: Cooling system (3MZ-FE)

Overhaul

1. REMOVE DRAIN PLUG (a) Remove the drain plug. (b) Remove the O-ring. 2. ASSEMBLE SST SST 09230-01010 (a) Install the claw to the overhaul handle, inserting it in the hole in part A as show ...

On-vehicle inspection

1. INSPECT COOLING SYSTEM FOR LEAKS (a) Remove the radiator cap. CAUTION: Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam ...

More about Toyota Highlander:

Rear axle hub & bearing ASSY LH (4WD)
REPLACEMENT HINT: COMPONENTS: SEE PAGE 30-4 1. REMOVE REAR WHEEL 2. SEPARATE SPEED SENSOR REAR LH 3. REMOVE REAR AXLE SHAFT LH NUT (a) Using SST and a hammer, unstake the staked part of the axle hub LH nut. SST 09930-00010 NOTICE: Loosen the staked part of the nut completely, otherwise ...