Toyota Highlander Owners Manual: Starting the engine
Driving
- With the brake pedal depressed, shift the shift lever to d.
- Release the parking brake.
- Gradually release the brake pedal and gently depress the accelerator
pedal to accelerate the vehicle.
Stopping
- With the shift lever in d, depress the brake pedal.
- If necessary, set the parking brake.
If the vehicle is to be stopped for an extended period of time, shift the
shift
lever to p or n.
Parking the vehicle
- With the shift lever in d, depress the brake pedal.
- Shift the shift lever to p.
- Set the parking brake.
- Vehicles without a smart key system:
turn the engine switch to the "lock" position to stop the engine.
Vehicles with a smart key system:
press the engine switch to stop the engine.
- Lock the door, making sure that you have the key on your person.
If parking on a hill, block the wheels as needed.
The following procedures should be observed to ensure safe
driving: ...
Make sure that the parking brake is set and shift the shift lever to d.
Gently depress the accelerator pedal.
Release the parking brake.
When starting off on an uphill
The hill-start assist ...
More about Toyota Highlander:
Inspection
1. INSPECT INTAKE AIR CONTROL VALVE ASSY NO.2
(a) Apply 26.7 kPa (200 mmHg, 7.9 in.Hg) of vacuum to the
actuator. Check if the actuator rod pulls the lever and
causes the valve to rotate open, as shown in the illustration.
(b) One minute after applying the vacuum, check that the actuator
ro ...
В© 2011-2024 Copyright www.tohighlander.com