1. PRECAUTION OF WASHER NOZZLE ADJUSTMENT
(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because;
(b) In case the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.
Problem symptoms tableDifferential carrier assy rear (4wd)
REPLACEMENT
HINT:
Differential components (See page 29-3 )
Rear drive shaft components (See page 30-4 )
Replace the RH side following the same procedures as with the LH
side.
1. REMOVE REAR WHEEL
2. REMOVE PROPELLER W/CENTER BEARING SHAFT ASSY (2AZ-FE ENGINE TYPE)
(SEE PAGE 30-12 )
...