Toyota Highlander manuals

Toyota Highlander Owners Manual: Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance:

General maintenance

General maintenance should be performed on a daily basis. This can be done by yourself or by a toyota dealer.

Scheduled maintenance

Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.

For details about maintenance items and schedules, refer to the “scheduled maintenance guide” or “owner’s manual supplement”.

Do-it-yourself maintenance

You can perform some maintenance procedures by yourself.

Please be aware that do-it-yourself maintenance may affect warranty coverage.

The use of toyota repair manuals is recommended.

For details about warranty coverage, refer to the separate “owner’s warranty information booklet” or “owner’s manual supplement”.

Repair and replacement

It is recommended that genuine toyota parts be used for repairs to ensure performance of each system. If non-toyota parts are used in replacement or if a repair shop other than a toyota dealer performs repairs, confirm the warranty coverage.

Reset the maintenance data (u.S.A. Only)

After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.

To reset the data, follow the procedure described below:

  1. Vehicles without a smart key system: turn the engine switch to the "lock" position with the trip meter a reading shown.

    Vehicles with a smart key system: turn the engine switch off with the trip meter a reading shown.

  2. Vehicles without a smart key system: while pressing the trip meter reset button , Turn the engine switch to the "on" position (do not start the engine, reset mode will be canceled).

    Vehicles with a smart key system: while pressing the trip meter reset button , Turn the engine switch to the ignition on mode (do not start the engine, otherwise the reset mode will be canceled).

  3. Continue to press and hold the button until the trip meter displays "000000".
  1. While the engine is running, switch the multi-information display to the "settings" screen.
  2. Select "maintenance system" on the "settings" screen.
  3. Select "yes" on the "maintenance system" screen.

"Initialization completed" will be displayed on the multi-information display when the reset procedure has been completed.

Allow inspection and repairs to be performed by a toyota dealer

Warning


If your vehicle is not properly maintained

Improper maintenance could result in serious damage to the vehicle and possible death or serious injury.

Handling of the battery

  • Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the state of california to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
  • Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the state of california to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.
  • Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling.
Maintenance
...

General maintenance
Listed below are the general maintenance items that should be performed at the intervals specified in the “owner’s warranty information booklet” or “owner’s manual supplement/scheduled ma ...

More about Toyota Highlander:

Coolant (3MZ-FE)
REPLACEMENT 1. DRAIN ENGINE COOLANT (a) Remove the radiator cap. CAUTION: Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. (b) Drain engine coolant by loosening the radiator drain co ...

© 2011-2024 Copyright www.tohighlander.com