Head restraints are provided for all seats.
Front seats and second seats (with a side table)

Second seats (without a side table)

Third seats

Removing the head restraints
Pull the head restraint up while pressing the lock release button.

Pull the head restraint up while pressing the lock release button.

Pull the head restraint up while pressing the lock release button.

Installing the head restraints
Align the head restraint with the installation holes and push it down while pressing the lock release button.

Align the head restraint with the installation holes and push it down while pressing the lock release button.

Align the head restraint with the installation holes and push it down while pressing the lock release button.

Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

Adjusting the third seat head restraints
Always raise the head restraint one level from the stowed position when using.
Warning
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
|
Memory recall functionRear spoiler
REPLACEMENT
1. REMOVE BACK WINDOW PANEL TRIM UPPER (See page 75-20 )
2. REMOVE REAR SPOILER
(a) Remove the 2 bolts and nut.
(b) Using a heat light, heat the body and rear spoiler to 40 to
60 C (104 to 140 F).
NOTICE:
Do not heat the rear spoiler excessively.
(c) Tie both piano wire ends ...