Toyota Highlander Service Manual: Engine hood/door
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ROOF HEADLINING ASSY (See page 76-21 )
3. REMOVE SLIDING ROOF SIDE GARNISH RH
(a) Using a screwdriver, detach the 4 claws and remove ...
ADJUSTMENT
HINT:
Use the same procedure for the RH side and LH side.
Centering bolts are used to mount the door hinge to the
vehicle body and door. The door cannot be adjusted with
the ce ...
More about Toyota Highlander:
Rear axle carrier sub-ASSY LH (4WD)
REPLACEMENT
HINT:
COMPONENTS: SEE PAGE 30-4
Replace the RH side using the same procedures as for the LH side.
1. REMOVE REAR WHEEL
2. SEPARATE SPEED SENSOR REAR LH
(a) Remove the bolt and separate the speed sensor from the axle carrier.
NOTICE:Be careful not to damage the speed sensor.
Pre ...
В© 2011-2026 Copyright www.tohighlander.com