REPLACEMENT
HINT: Installation is in the reverse order of removal.
1. REMOVE STEERING COLUMN COVER LWR (SEE PAGE 50-8 )
2. REMOVE STEERING COLUMN COVER UPR (SEE PAGE 50-8 )
3. REMOVE HEADLAMP DIMMER SWITCH ASSY
(a) Disconnect the connector.
(b) Using a screwdriver, disengage the claw, and remove the headlamp dimmer switch assy.
NOTICE: Pressing the claw hard breaks the claw.
HINT: Tape the screwdriver tip before use.
Transfer system (4WD)
PRECAUTION
Before disassembly, clean the transfer assy and remove any deposited
sand or mud to prevent
it from entering the inside of the transfer during disassembly and assembly.
When removing any light alloy part such as a transfer cover, do not pry
it off with a tool like a
screwd ...